How to Hard Reset and Soft Reset Samsung Galaxy S24 Ultra, Plus CMD and Terminal Methods

How to Hard Reset and Soft Reset Samsung Galaxy S24 Ultra, Plus CMD and Terminal Methods

 

Resetting your Samsung Galaxy S24 Ultra can resolve various issues, such as slow performance, app crashes, or other system problems. There are different ways to reset your device, depending on whether you want to do a soft reset, hard reset, or use CMD on Windows or Terminal on MacBooks. In this guide, we'll cover all these methods in detail.

 

What is a Soft Reset?

 

A soft reset is simply restarting your phone. It’s the safest and quickest way to fix minor issues like apps not working properly or sluggish performance. A soft reset doesn’t delete any data, it just refreshes the phone’s system and can clear temporary files or minor glitches.

 

How to Perform a Soft Reset on Samsung Galaxy S24 Ultra

 

To perform a soft reset on your Galaxy S24 Ultra, follow these simple steps:

1. Press and Hold the Power Button: Press and hold the power button located on the right side of your phone.
2. Tap "Restart": After a few seconds, you’ll see a menu appear on your screen. Tap the “Restart” option. Your phone will shut down and restart automatically.

This soft reset will not erase any of your personal data or settings; it’s simply a restart to refresh the device’s system.

 

What is a Hard Reset?

 

A hard reset (also known as a factory reset) will erase all data on your phone, including apps, settings, and personal information. It restores the device to its original factory settings. This is often used when your phone is unresponsive, or if you're selling it or giving it away and want to ensure all your data is wiped.

 

How to Perform a Hard Reset on Samsung Galaxy S24 Ultra

 

If you’re ready to perform a hard reset on your Samsung Galaxy S24 Ultra, follow these detailed steps. Keep in mind, this process will erase everything on your phone, so make sure to back up your data beforehand.

1. Turn Off Your Samsung Galaxy S24 Ultra: Press and hold the power button, and then tap "Power Off" on the screen. Wait for the phone to fully shut down.
2. Enter Recovery Mode: Press and hold the Volume Up button and the Power button simultaneously.
3. Release the Buttons: Once the Samsung logo appears, release both buttons. You’ll enter the Recovery Mode screen.
4. Select "Wipe Data/Factory Reset": Using the volume buttons, navigate to the "Wipe data/factory reset" option. Press the Power button to select it.
5. Confirm the Reset: On the next screen, confirm that you want to wipe all data by selecting "Yes." This will initiate the reset process.
6. Reboot the Device: After the reset is complete, you will return to the Recovery Mode screen. Select “Reboot system now” to restart your phone.

Your Galaxy S24 Ultra will now be restored to its factory settings. Once the reset is complete, you can set it up as a new device or restore your backup if you have one.

 

How to Reset Samsung Galaxy S24 Ultra Using CMD on Windows Laptop

 

If you’re using a Windows laptop and want to reset your Samsung Galaxy S24 Ultra, you can do so using the Command Prompt (CMD) feature. This method is typically used when your phone is stuck in a boot loop or cannot be accessed normally.

Here’s how you can reset your Samsung Galaxy S24 Ultra using CMD on Windows:

1. Install Samsung USB Drivers: Before you start, ensure that you’ve installed the Samsung USB drivers on your Windows laptop. You can download them from the official Samsung website.
2. Enable Developer Options on Your Galaxy S24 Ultra: Go to “Settings > About phone” and tap "Build number" seven times to enable Developer Options. Then, go to “Settings > Developer options” and enable “USB debugging.”
3. Connect Your Phone to the Laptop: Use a USB cable to connect your Samsung Galaxy S24 Ultra to your Windows laptop.
4. Open CMD: On your laptop, press Win + R to open the Run dialog box, type "cmd" and press Enter to open the Command Prompt.
5. Navigate to ADB Folder: In CMD, navigate to the folder where ADB (Android Debug Bridge) is installed. Use the following command:

   cd C:\adb

6. Check Device Connection: Type the following command in CMD to ensure your phone is connected:

   adb devices

   If your device is listed, you're ready to proceed. If not, ensure your USB debugging is enabled and that the USB drivers are installed correctly.
7. Reboot into Recovery Mode: Type the following command in CMD to reboot your phone into recovery mode:

   adb reboot recovery

8. Perform the Hard Reset: Once your device enters Recovery Mode, you can navigate and select the “Wipe data/factory reset” option, just like you would using the physical buttons on the phone.

This method can be helpful when the device is unresponsive or if you cannot access the settings menu directly.

 

How to Reset Samsung Galaxy S24 Ultra Using Terminal on MacBook

 

If you're a MacBook user, you can also reset your Samsung Galaxy S24 Ultra using the Terminal and ADB commands. Just like the CMD method on Windows, you will need to install the necessary drivers and enable USB debugging on your phone.

Here’s how you can reset your Samsung Galaxy S24 Ultra using Terminal on a MacBook:

1. Install ADB on Your MacBook: Open Terminal and use Homebrew (if you don’t have it, you can install it) to install ADB:

   brew install android-platform-tools

2. Enable Developer Options and USB Debugging: Go to “Settings > About phone,” tap on “Build number” seven times to enable Developer Options, then enable USB Debugging under “Settings > Developer options.”
3. Connect Your Phone to the MacBook: Use a USB cable to connect your Samsung Galaxy S24 Ultra to your MacBook.
4. Open Terminal: Open the Terminal application on your MacBook.
5. Verify Device Connection: In the Terminal window, type the following command to verify that your phone is connected:

   adb devices

   Your device should appear in the list of connected devices.
6. Reboot into Recovery Mode: Type the following command to reboot into recovery mode:

   adb reboot recovery

7. Perform the Hard Reset: Once in recovery mode, use the volume buttons to select “Wipe data/factory reset,” and confirm by pressing the power button. The process will wipe all data on your device.

Your Galaxy S24 Ultra will now be reset and ready for setup or restoration of backup.

 

Important Notes Before Resetting Your Samsung Galaxy S24 Ultra

 

• Backup Your Data: Before performing any reset, especially a hard reset, make sure you’ve backed up your data to avoid losing important files, contacts, or photos.
• Charge Your Phone: Ensure your Samsung Galaxy S24 Ultra is sufficiently charged (at least 50%) before performing any reset to prevent the phone from turning off mid-process.
• Use the Right Method: A soft reset is the safest and easiest option for minor issues, while a hard reset should be used for more serious problems, as it will erase all data.